Home    Services    Digital  Conversions    My Projects    Links    Contact me
 
My Projects
 

HO model trains for digital and analogue

Service

Repairs

Digital Conversions

Paint Reconditioning

Level Crossing 7192 to digital

This was such a rewarding project and really so simple anybody could have a go. All that is needed is two 12 volt DC motors some gears from an old loco and two old working 60902 decoders. Click on the images below for more detail and if you are keen to undertake this project for yourself then email me and I will send some more finer details. The three requirements is a CS2 or CS3 that has the 'events' ability, two reed swiches and a Märklin M84 decoder.

Märklin 7192 Level Crossing
7192
7192
gear
decoder
paint
bottom
youtube

Hover over the icon to see a larger image.

Click on the YouTube icon to watch the video

 

V200 reprayed and converted to digital

I decided to revamp and digitise an old V200 loco 3021 loco. The most difficult part was masking the fine lines and painting the descriptions of the locomotive. Check out the images below:

V200
v200
box
leds
V200
v200

Hover over the icon to see a larger image.

 

Kibri Roundhouse Mechanised Doors
I bought a Kibri roundhouse because it was easy to build and all just clipped together. It looked graet on my layout with LED lighting etc but something was missing. Then I decided I needed to make the doors open and close remotely. This wasn't as easy as I thought but in the end after assembling and reassembling I finally was succesful. It required rhree miniture servos, some piano wire, some servo horns and a servo controller which I bought at a huge maodel train exhibition while living Melbourne. Check out the images below:
Kibri_39452
Kibr
servoss
control
Doors
rod
servo

Kibri Round House 39452

Hover over the icon to see a larger image.